NE-C30_main.book Page 13 Friday, October 3, 2008 11:46 AM
5.
Reattach the vaporiser head to the medication
tank.
6.
Put the inhalation top back inside the
medication tank.
1)
Align the protrusion on the inhalation top
with the indent on the medication tank, as
shown.
2)
Rotate the inhalation top clockwise and align
with the medication tank until they click in
place.
7.
Attach the desired inhalation attachment, as described below.
Attaching the mouthpiece
Make sure you also attach the cap, when using
the mouthpiece.
1)
Attach the cap to the inhalation air inlet.
2)
Attach the mouthpiece to the inhalation top.
Attaching the adult mask (PVC)
Attach the mask to the inhalation top.
Note: If the amount of aerosol is too great,
attach the cap.
3. Preparing the nebuliser for use
1
max
5
3
2
1
2
EN
13