Harbor Breeze LYNNHAVEN DTA54GPT5CL Manual Del Usuario página 9

WIRING
1B. FAN CONTROLLED BY PULL CHAIN, LIGHT
BY WALL SWITCH: If you intend to control the fan
light with a separate wall switch, connect BLACK
wire from fan to BLACK wire from ceiling. Connect
BLUE wire from fan to the BLACK wire from the
independent wall switch for the light. Connect
WHITE wire from fan to WHITE wire from ceiling.
Connect all GROUND (GREEN) wires together
from fan (on downrod and mounting bracket) to
BARE/GREEN wire from ceiling. (Fig. 1B)
1C. FAN AND LIGHT CONTROLLED BY TWO
WALL SWITCHES: If you intend to control the fan
and light with separate wall switches, connect
BLACK wire from fan to BLACK wire from the
independent wall switch for the fan. Connect BLUE
wire from fan to the BLACK wire from the other
independent wall switch for the light. Connect
WHITE wire from fan to WHITE wire from ceiling.
Connect all GROUND (GREEN) wires together
from fan (on downrod and mounting bracket) to
BARE/GREEN wire from ceiling. (Fig. 1C)
NOTE: Black wire is hot power for fan. Blue wire is
hot power for light kit. White wire is common for fan
and light kit. Green or bare wire is ground.
2.
Wrap electrical tape around each individual wire
connector (CC) down to the wire as shown in Fig. 2.
WARNING: Make sure no bare wire or wire
strands are visible after making connections. Place
green and white connections on opposite side of box
from the black and blue (if applicable) connections.
Turn spliced/taped wires upward and gently push
wires and wire connectors (CC) into outlet box.
Hardware Used
CC E3 Wire Connector
2
x4
9
FAN CONTROLLED BY PULL CHAIN, LIGHT BY
WALL SWITCH
1B
BLACK
BLACK (WALL SWITCH)
120 V Power
FROM
WHITE
CEILING
GROUND/GREEN (BARE)
GREEN
BLUE
BLACK
FAN
GREEN
FROM FAN
FAN AND LIGHT CONTROLLED BY TWO WALL
SWITCHES
BLACK (WALL SWITCH)
1C
BLACK (WALL SWITCH FOR LIGHT)
120 V Power
FROM WHITE
CEILING
GROUND/GREEN (BARE)
GREEN
BLUE
BLACK
FAN
GREEN
FROM FAN
CC
WHITE
WHITE
WHITE
WHITE
CC
CC