01_EN_3P257186-2A.fm Page 17 Saturday, October 31, 2009 2:19 PM
ON TIMER Operation
■ To use ON TIMER operation
1. Press
.
"
Each pressing of
The time can be set between 1 to 12 hours.
• The TIMER lamp lights up.
■ To cancel ON TIMER operation
2. Press
• "
" disappears from the LCD.
• The TIMER lamp goes off.
■ To combine ON TIMER and OFF TIMER
• A sample setting for combining the 2 timers is shown below.
• "
" and "
NOTE
■ In the following cases, set the timer again.
• After a breaker has turned off.
• After a power failure.
• After replacing batteries in the remote controller.
" is displayed on the LCD.
advances the time setting by 1 hour.
.
" are displayed on the LCD.
17