Movement Treadmill R4 Manual Del Propietário página 80

OPERATING INSTRUCTIONS
ELECTRONIC MODULE FUNCTION INSTRUCTIONS
•P0: USER training program; P1-P36 the predefined program;
•U01-U03: User-defined program.
•(FAT) FAT: Body fat function.
•LED display screen
• Speed of 1.0 ~ 14 km / h
•Avoid overloading
•Auto check and audible alert
ELECTRONIC MODULE SCREEN
•"DISTANCE" screen: Shows the distance in km.
•"CALORIES" screen: Shows the calories expended during the exercise.
•"TEMPO" screen: Shows the time in MM: SS.
•"SPEED" screen: Shows the speed in km / h.
•"PULSE" screen: Shows the number of Pulses per minute.
BUTTONS INSTRUCTION
•PROGRAM KEY: Program selection key: with the belt stopped, select the manual
program cycle for "P1-P36 U1 ~ U3 FAT". The standard speed of the manual
→ →
program is 1.0 km / h. The highest speed is 14 km / h.
• MODE KEY: With the mat stopped, press the MODE key. The modes can vary between
"Time countdown calories countdown distance countdown Normal mode". The
→ → →
return to the default occurs every 30 minutes in programs P1-P36. It is not possible to
select the "FAT" program when in "FAT" mode.
• START KEY: Starts the treadmill
• KEY TO: Pause the training, and can be resumed if pressed again.
• STOP KEY: For training. When the LCD display shows the ERR message, press the
"STOP" key to clear the message. With the conveyor moving, press the "STOP" key twice,
and the conveyor stops immediately.
• SPEED KEY + / -: To increase or decrease the speed, the treadmill must be working.
When pressing the TELCLAS + / - at an increase in speed or a decrease in speed in the
amount of 0.1. Hold the + or - key for two seconds and the speed will automatically
increase or decrease.
• SPEED SHORTCUT: with the belt moving, increase the speed by pressing the "SPEED
SHORTCUT" key 2, 5, 7, 9, 11, 13.
METER-INCH CONVERSION FUNCTION
•Remove the security key and press the "PROGRAM" and "MODE" keys at the same time.
The "SPEED" window displays a "0.6", which means converting from kilometers to miles.
Remove the security key and press the "PROGRAM" and "MODE" keys at the same time.
The "SPEED" window displays a "1.0", which means converting miles to kilometers.
30