Movement Treadmill R4 Manual Del Propietário página 93

MAINTENANCE
CONSOLE
ITEM
A - Under load and some part is
blocked leading to excessive motor
current
E5
B - Defective motor and controller
C - Power and voltage do not
conform or are too low
A - Voltage below 50V of correct
voltage
E6
B - Defective controller
C - Motor connection wire badly
connected
A - Poorly connected or defective
pulse sensor wire
No pulse
B - Defective console circuit
Console
A - The screw on the PCB board is
display
loose
does not
B - Defective console
light up
ENCONTRE PONTO AUTORIZADO PERTO DE VOCÊ
In case of any problem on your treadmill contact an Authorized Point e request a
technical visit. Any questions can be answered through our curstomer service center by
telephone 0800-7724080. Never try to replace any piece nor make any modifications
on your treadmill. Risk of losing warranty. To find an Authorized Point visit the website
http://movement.com.br/assistenassistencia-tecnica and allow the browswe to access
your location.
When contacting an Authorized Point, keep in hands the following documents:
•Purchase invoice, copy or original (in case of warranty):
•Model:
•Serial Number:
•Purchase invoice date:
CAUSE
43
MAINTENANCE
Adjust the treadmill and restart
Change engine and controller
Perform a new voltage test
Check the voltage in the socket and perform
a new test with the correct voltage
Change controller
Connect motor wire correctly
Connect sensor wire correctly or
change the wire
Change the console
Tighten the screw securely
Switch console