Safety Instructions - cinetto B-Moved PS40.3 Manual Del Usario

SAFETY INSTRUCTIONS

Safety guidelines of "B-MOVED" system
Intended use
"B-Moved" control system by Cinetto is exclusively intended to move sliding doors for wardrobes or for walk-in clo-
sets. The maximum weight limit of each door, unless otherwise noted, is specifi ed on the technical datasheet of each
compatible sliding system by Cinetto. The system must be positioned at an inaccessible height for the user during the
normal use.
System restrictions
Stowing or placing or mounting any kind of material on the top of the furniture, except for the sliding system and B-MOVED sy-
stem itself, is strictly forbidden. Failure to respect this indication can irreversibly damage the system and determine a dangerous
condition for the user.
Use environment of the system
B-Moved system is designed, realized and tested for domestic use, in accordance with DIN 60335. The system is realized with
all the safety equipment in accordance with DIN 60335. Keep the system at a use temperature compatible with domestic environ-
ment, free from interfering material and protected against impact.
Risk evaluation activity during the project design
Limitation of liability
Using and operating "B-Moved" in accordance with the technical datasheet of each compatible sliding system is man-
datory.
Any variation, manipulation, change of environment of use or improper application exclude Cinetto F.lli s.r.l. from any
liability for direct or indirect damage.
"B-Moved" installation instructions
Following the Installation instructions of each B-MOVED compatible sliding system is mandatory, to ensure the right
functioning and prevent wrong installation.
4
"B-Moved" system cannot be used with products out of the ones
allowed by the producer.
In any case the producer is not responsible for improper installa-
tion and use.
The system must be used only with the control unit supplied by the
producer.
The system must be used only with the power unit supplied with the
control unit.
The transmission system must be positioned at an inaccessible hei-
ght for the user during the normal use, keep the minimum safety
high of 2.5 mt.
During "B-Moved" design activity have been evaluated severe and low risks. To ensure the
user's safety have been applied preventive actions. Due to this, following the use and installa-
tion instructions is mandatory.
The following risks have been evaluated: shear and collision risk; environmental agents' al-
teration and impact during transport; alteration after impact during installation and mainte-
nance; unintentional emission, transmission and reception of electromagnetic signals; electric
shock risk; wear risk; overheating and fi re risk; malfunctioning after wrong installation risk.