King gates JET XL Instrucciones Y Advertencias Para La Instalación Y El Uso página 25

and declaration of incorporation of partly-completed machinery
Declaration in accordance with the following Directives: 2004/108/EC (EMC); 2006/42/EC (MD) annex II, part B
Declaration number: 30/JET XL
Manufacturer's Name:
Address:
Type of product:
Model:
Accessories:
The undersigned Giorgio Zanutto as Chief Executive Officer, hereby declares under his own responsibility that the product
identified above complies with the provisions of the following directives:
• DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of 15 December 2004 on the approxi-
mation of the laws of Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC, in
accordance with the following harmonised standards: EN 61000-6-2:2005; EN 61000-6-3:2007 + A1:2011
In addition, the product conforms to the following directive in accordance with the provisions applicable to partly-comple-
ted machinery:
• Directive 2006/42/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of 17 May 2006 regarding machines and
amending directive 95/16/EC (consolidated text)
– It is hereby declared that the pertinent technical documentation has been drafted in accordance with Annex VII B of
Directive 2006/42/EC and that the following essential requirements have been met: 1.1.1 - 1.1.2 - 1.1.3 - 1.2.1 - 1.2.6
- 1.5.1 - 1.5.2 - 1.5.5 - 1.5.6 - 1.5.7 - 1.5.8 - 1.5.10 - 1.5.11.
– The manufacturer agrees to send the national authorities any pertinent information on partly-completed machinery, in
response to a motivated request, without affecting its intellectual property rights.
– If the partly-completed machinery is operated in a European country with an official language other than the language
used in this declaration, the importer must include a translation with this declaration.
– The partly-completed machinery must not be operated until the final machine in which it is to be incorporated is
declared to conform to the provisions of Directive 2006/42/EC, if applicable.
The product also complies with the following standards:
EN 60335-1:2012; EN 60335-2-103:2012+A11:2009
The parts of the product which are subject to the following standards comply with them:
EN 13241-1:2003 + A1:2011; EN 12445:2002; EN 12453:2002; EN 12978:2003 + A1:2009.
Sacile, Dicembre 10 2015
CE DECLARATION OF CONFORMITY
Revision: 0
KING GATES S.R.L.
Via A. Malignani,42 - 33077 Sacile (PN) Italia
Electromechanical gear motor
JET XL
Language: EN
Giorgio Zanutto
(Chief Executive Officer))
11