Using The Speaker With Multiple Devices; Pairing Another Device; Managing Multiple Connections; Scrolling Through Other Paired Devices - Bose SoundLink Colour Guia Del Propietario

Using the speaker with multiple devices

The speaker can remember up to eight paired devices and can be actively
connected to two devices at a time.

Pairing another device

1.
With the speaker and the mobile device both on, press and hold
the Bluetooth indicator blinks blue and the voice prompt says, "Ready to pair
another device".
2.
On your mobile device, make sure Bluetooth is on.
(The Bluetooth menu is usually found in the Settings menu.)
3. Select Bose Colour SoundLink from the device list.
The Bluetooth indicator glows solid white, and the voice prompt says
"Connected to <device name>".
Note: The speaker can remember up to eight devices. If you pair a ninth
device, the least recently used device will be deleted from the speaker's
memory.

Managing multiple connections

When powered on, the speaker will automatically connect to the two most recently
connected devices.
When two devices are actively connected, you can play music from either device.
To switch between connected devices, pause the first device and play music from
the second.

Scrolling through other paired devices

To play music from a device in the speaker's memory that is not currently
connected:
1.
Press to hear which device(s) are currently connected.
2. Press again (within three seconds) to connect to the next paired device.
3. Repeat step 2 until you hear the correct device name.
Note: To use this feature, voice prompts must be on. (See "Turning voice
prompts off/on" on page 9.)

Clearing the speaker memory

To clear the speaker's memory of all devices:
1.
Press and hold
cleared."
2. Delete Bose Colour SoundLink from your mobile device's Bluetooth list.
All Bluetooth devices are cleared and the speaker is ready to pair.
for ten seconds, until you hear "Bluetooth device list
Operation
until
English - 11