System Status Indicators; Connecting An Aux Device - Bose SoundLink Colour Guia Del Propietario

System status indicators

The system status indicators are located on the top of the speaker, above the
corresponding buttons.
Battery indicator (while speaker is operating on battery power)
Green: High charge
Amber: Medium charge
Red blinking: Low charge/Charge now
See "Operating on battery power" on page <?> for more information.
Bluetooth indicator
Blue blinking: Ready to pair
White blinking: Connecting
White solid: Connected
AUX indicator
White solid: AUX is the selected source

Connecting an AUX device

You can use your speaker with any device that features headphone or audio
output, such as a portable digital music player. This feature requires using a stereo
audio cable with a 3.5 mm plug on each end to connect the audio output of your
device to the AUX input on the speaker. This type of cable is available for purchase
at electronics stores.
To connect an AUX device:
1. Connect the audio cable to the AUX IN connector on the back of the speaker
and to the headphone or audio output connector on the device.
2. Turn on the speaker.
3.
Press to select the AUX source.
4.
Adjust the volume on the connected device to near maximum, then use the
speaker volume buttons to adjust the volume level.
Operation
English - 13