Technical Specifications; Troubleshooting Guide; Fcc Compliance Information - Beurer UWB 55 Manual Del Usuario

Let the underblanket dry flat on a drying rack. To prevent product damage, do not use clothespins to attach
the underblanket to a clothesline or rack. You may need to gently stretch the underblanket back to its original
size and shape before drying it.
Storage
NOTICE
• Let the heated underblanket cool before putting it away. The underblanket may otherwise be
damaged.
• To prevent the underblanket from becoming sharply creased, do not store other objects on top of
the underblanket. The product may otherwise be damaged.
• If you do not intend to use the underblanket for any length of time, store it in the original packaging
in a dry environment and without weighing it down.
• Disconnect the mains connection and the controller from the underblanket to do so.
Disposal
Observe the local regulations for material disposal. Dispose of the device in accordance with local regulations.
If you have any questions, please contact the local authorities responsible for waste disposal.
7� Technical Specifications
Type:
Model:
Underblanket Size:
Power supply:
Wattage:
Material:
Timer:
Temperature levels:
8� Troubleshooting Guide
Problem
The LED is not illuminated while
• The controller is properly connected to the underblanket.
• The mains plug is connected to the working electrical
outlet.
• The sliding switch is set to ON.
9� FCC Compliance Information
Heated Underblanket UWB 55
Responsible Party – U.S. Contact Information:
Beurer North America LP
1 Oakwood Boulevard, Suite 255
Hollywood, FL 33020
United States
1-800-536-0366
info@beurer.com
UWB 55
TT150x80x8X1
59 x 31.5 in (150 x 80 cm)
120 V / 60 Hz
50 W
100% polyester
1, 2, 10 hours or always on
8 temperature settings
setting 1: minimum heat
setting 2-7: medium heat
setting 8: maximum heat
Cause
The safety system
has switched the
underblanket off
permanently.
10
Solution
Send the product
and the controller for
servicing.