Kohler K-72218 Guía De Instalación Y Cuidado página 7

Tab
Cover
Apply grease.
Power
Cord
Sensor
LED
3. Install the Valve
CAUTION: Risk of restricted waterflow. The outlet hose
must not be taut or kinked when installed. Locate the
solenoid valve within 7" (178 mm) to 8" (203 mm) of the
faucet centerline.
Mount the Bracket
NOTE: Locate the solenoid valve within 7" (178 mm) to 8" (203
mm) from the faucet centerline. Allow adequate clearance for
servicing.
NOTE: The mounting bracket should be secured with two suitable
fasteners (not supplied) based on the type and thickness of the
cabinet or wall material.
Fasten the mounting bracket vertically to the cabinet or wall.
Connect the Wires
NOTE: The solenoid can be positioned right or left. Remove the
appropriate tab on the cover.
Kohler Co.
Bracket
Handle Switch
Solenoid
7
Solenoid
Wire
1186051-2-D