Installation - Pentair PVM Traducción De Las Instrucciones Originales

EN
ORIGINAL INSTRUCTION
CHAPTER 6

INSTALLATION

Always refer to the local or national regulations and codes relating to the selection of the installation site, the water and power con-
nections, etc.
If installed for use with drinking water, clean the pump prior to installation - also clean if left unused for prolonged periods of time.
For drinking water, all materials used upstream and downstream of the pump must also be suitable for contact with drinking water for
human consumption
6.1 POSITION
Pumps should be installed in a protected environment – not exposed to weather. Make sure that there are no obstructions to prevent
proper motor cooling.
7