Arai Helmet 2012 Manual De Instrucciones página 10

18
English
To wash fabric coverings, put them into lukewarm water with small
amount of laundry soap or your own shampoo and wash gently by hand.
Rinse well with fresh water and wipe off with a soft cloth. Dry them in the
shade at ambient temperature.
WARNING:
Never use petrol, thinner, benzene or any other solvents.
To replace the fabric covering, ensure it is turned right side out, and
stretch the covering over the pad, and adjust the covering to lie smoothly.
Then push the rectangular collar through the pad assembly and adjust into
final position.
RX-7GP / CORSAIR-V / QUANTUM-ST / RX-Q / SIGNET-Q
NOTE:
Leave the orange EMERGENCY TAB outside the fabric covering so that it
can be accessed even when the cheekpad is installed in the helmet.
ABOUT EMERGENCY TAB SYSTEM:
The EMERGENCY TAB SYSTEM is to smoothly remove cheekpads that
may be a hindrance when rescuers attempt to remove a helmet from an
injured helmet wearer. With the orange label that says PULL HERE TO
REACH EMERGENCY TAB which is sewn on the neckroll tab, rescuers can
recognize that the helmet is equipped with the EMERGENCY TAB and can
get access to the tab at each side by lifting the neckroll tab to expose the
EMERGENCY TAB which is then pulled downward to remove the cheekpad.
WARNING:
Rescuers need to have sufficient knowledge and training about this
system. The Emergency Tab may not always be an effective measure to
securely remove cheekpads depending on circumstances of accident
or condition of injured wearers.