To Operate Browvents; To Operate Mouthvent; To Operate Top Vents - Arai Helmet 2012 Manual De Instrucciones

RX-7GP / CORSAIR-V / QUANTUM-ST / RX-Q / SIGNET-Q / VECTOR-2 / CHASER-V
MID-WAY
OPEN
position
REBEL REBEL
FRONT
OPEN CLOSE OPEN CLOSE
6
!
OPEN
AXCES-Ⅱ
CLOSE
REBEL
CLOSE
OPEN
FRONT
CLOSE
OPEN
English
NOTE:
To return the shield to fully closed position, the shield latch tab must
be pushed back. It is not sufficient to push the shield itself down. Re-closure
must be made by means of the shield latch tab.

TO OPERATE BROWVENTS

The Browvents are operated from fully closed through intermediate, to fully open
positions by simply pulling the vent control down to open, pushing up to close.

TO OPERATE MOUTHVENT

RX-7GP / CORSAIR-V / QUANTUM-ST / RX-Q / SIGNET-Q / VECTOR-2 / CHASER-V
The Monthvent is operated by simply pulling the vent control down to open,
pushing up to close. When the vent control is fully open, air is directed up
along the interior surface of the shield to help prevent fogging and when
it is in its mid-way position air is channeled back to further enhance the
airflow around the month and nose to help move hot moist air out faster.
REBEL
The Mouthvent is operated by simply pulling the vent control down to
open, pushing up to close. When the vent control is in its mid-way position
air is only directed up along the interior surface of the shield to help
prevent fogging, and when it is fully open air is also directed around the
mouth and nose to help move hot moist air out faster.
AXCES-Ⅱ
The Monthvent is operated by simply pulling the vent control down to
open, pushing up to close.

TO OPERATE TOP VENTS

Simply push the switches/levers on each vent to open/close the vents.