With the three trimmers on the front of the control unit it is possible to fi nely tune the system's performance on the basis of the
customer's requirements or on the shape of the bumper. The trimmers manage the three following functions:
SENSITIVITY - Adjusting the capsules' reading sensitivity. Therefore it is possible to modify the protection space.
OFFSET - Danger zone "continuous sound" detection distance.
VOLUME - To manage the loudspeaker's volume.
VOLUME
CAR STEREO MUTE – This function allows to automatically mute the car stero du-
ring a parking manoeuvre and, more generally, at the very activation of the par-
king system to prevent the sound of the stereo from covering the signalling of a
possible obstacle.
To activate this function, connect the PURPLE wire to the car stereo MUTE setting.
NOTE FOR FRONT APPLICATION: If the parking system is programmed to work with the
vehicle's odometer, it is advisable NOT to use the mute function.
SYSTEM'S CUT-OFF FOR TRAILER CONNECTION TO THE VEHICLE
TRAILER – this rear application dedicated function allows to automatically
deactivate the control unit when the ground line has been taken from the
trailer's electric connector.
CALIBRATION
SENSITIVITY
OFFSET
ADDITIONAL FUNCTIONS
19
Car radio mute
Fig.14
Trailer disabling
Disabling OFF
BROWN
Fig.15
Fig.11
Fig.12
Fig.13
PURPLE
CAR RADIO
Disabling ON
BROWN