Publicidad
STEP 2B Attach Wall Plate to Wall
CAUTION:
Avoid potential personal injury or property damage!
Mount wall plate
●
16
Minimum solid concrete thickness: 8 in. (203 mm)
●
Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
●
Minimum horizontal space between fasteners: 16 in. (406 mm)
●
1.
Position the wall plate template
2.
Drill three pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 3 ¾ in. (9.5 cm). Never drill into the mortar between blocks.
1
14
directly onto concrete surface (no wall covering)
on the wall at your desired height. Level the wall plate template and mark the hole locations.
15
Min.
16 in.
(406 mm)
Solid Concrete or Concrete Block Option
2
15
Concrete Installation Kit CMK1 is not included
at 1-888-333-9952
Contact Customer Service
to have the kit shipped directly to you.
15
3¾ in. (9.5 cm)
3/8 in.
(10 mm)
Publicidad
