Strainer And Drain Cap - Bradley Verge LVQ Serie Manual Del Usuario

Installation
8a
Strainer and Standard Drain Cap
WashBar removed for clarity.
Drain cap is labeled front and back. Be sure front is
facing the user. Top surface of drain cap should be
sloped away from user.
A
Install the trough strainer and secure
in place using the #10 x 1" supplied
screws.
Position drain cap over trough strainer,
B
aligning tabs into drain. Push drain
cap down until drain cap is flush with
basin. Grommets should hold drain cap
securely against drain trough walls.
C
To remove drain cap, carefully slip flat
screwdriver into left or right hand corner
of drain cap and gently lift upwards.
8b
Strainer and Slotted Drain Cap
WashBar removed for clarity.
Drain cap is labeled front and back. Be
sure front is facing the user. Top surface
of drain cap should be sloped away
from user.
A
Install the trough strainer and slotted drain
cap as shown. Secure in place using the
#10 x 1½" supplied vandal screws.
Bradley • 215-1842 Rev. H: ECO 20-08-028B
#10 x 1"
Screw
#10 x 1½"
Vandal
Screw
Standard Drain
Front
Slotted Drain
Cap
1/21/2021
LVQD1
Cap
#10 x 1"
Screw
Trough
Strainer
Note Angle of
Drain Cap
#10 x 1½"
Vandal
Screw
Trough
Strainer
17