Ego Power+ STX3800 Manual Del Operador página 17

4. Mount the locking pole and pre-
tighten the wing nut. Make sure
that the loop handle is positioned
upwards and points toward the top
of the rear handle (Fig. 7).
5. Pull up the level of the locking pole
so that you can easily move/rotate
the loop handle to where you feel
comfortable.
NOTICE:
The loop handle should be
only adjusted between the threshold
ring and the warning label on the
carbon-fiber shaft (Fig. 8).
6. Lock down the lever of the locking
pole (Fig. 9).
WARNING:
tool without the loop handle securely
attached.
Do not use the
56-VOLT LITHIUM-ION REAR-MOTOR 15" STRING TRIMMER — STX3800
7
8
9
17