Conceptronic Grab'n'GO CHD3NET Guia De Instalacion página 23

ENGLISH
5 Configure your Conceptronic Grab'n'GO Network Harddisk
The Conceptronic Grab'n' GO Network Harddisk needs to be configured through your web
browser.
The default settings for the Conceptronic Grab'n' GO Network Harddisk are:
HOSTNAME
GROUP NAME
IP ADDRESS
USERNAME
PASSWORD
HARDDISK
Open your WEB Browser or your Windows Explorer.
The CHD3NET can be accessed through the IP address or by the Hostname.
Enter "Storage" in the address bar and press enter.
A Login screen will appear:
Enter the username and password and click "OK" to login to the web configuration pages.
Note: The default username and password are:
Username
Password
Note: If your Conceptronic Grab'n' GO Network Disk is provided with a Harddisk it is already
pre-formatted in FAT32, you can directly configure and/or use the device.
If you change or use your own new hard disk you first need to format the drive
through the 'Disk Utility' screen.
: STORAGE-xxxx (the last four digits is MAC address)
: WORKGROUP
: 169.254.0.1
: admin
: admin
: FAT–32 (NTFS CANNOT BE READ)
: admin
: admin
23