Conceptronic Grab'n'GO CHD3NET Guia De Instalacion página 25

ENGLISH
5.1.2 Administration
At the section "Administration", you can change the password of the Administrator or set the
Date and Time.
To change the password, press "Change" (2) behind the "Administrator" line and enter
o
your new password. Verify your new password and press "OK" to save.
Note: After changing the password you need to use your new password directly when
opening new pages. It's not possible to change the name of the Administrator.
To change the date and Time, press "Change" (2) behind the "Date/Time" line:
o
A
C
E
A. Enter the correct Date (year, month, day)
B. Enter the correct Time (hours, minutes, seconds)
C. Enable or Disable the SNTP functionality (SNTP = Simple Network Time Protocol)
D. Select a Time Server (to use the Time Server Feature, the device must have a correct
gateway IP/DNS address to connect through The Internet to that server, Or enter a Time
Server of your own choice.
E. Select the correct Time Zone where you are in.
To save the configuration, press "OK" or press "Cancel" to return to the Status page
without making changes.
B
D
25