Conceptronic Grab'n'GO CHD3NET Guia De Instalacion página 30

ENGLISH
5.4.2 Add a Password to the shared folder(s)
Every folder in the Shared List can be password protected.
By default every folder is unprotected and can be accessed by anyone through the whole
network.
If you want to protect a Shared Folder with a Password, select the Shared Folder (F) and press
"Password" (G).
Type your password and also enter the same password in the verify section. By Pressing "OK"
the folder will be password protected.
5.5 FTP Server
Select at the left side "FTP Server" to configure the FTP server option of the Conceptronic
Grab'n' GO Network disk.
B
To use the FTP server feature, the FTP Status must be "Enabled" (A) (Enabled by default).
Anonymous access can have Read Only access or Read / Write Access
Select the option you want. For anonymous access you can setup a Home Directory (this can be
any Folder from the Shared Folder list)
Note: We strongly suggest you to disable anonymous access to prevent unauthorized access
to your FTP Server. This will secure your device and data more.
A
C D E
30