Energetics POWER RUN 5.0 Manual Del Usuario página 4

COMPUTER INSTRUCTIONS
BUTTONS:
START
Press to start exercise at initial speed 0.8 km/ 0.5ml.
STOP / ENTER
1. Press to confirm program and preset function values under setting mode.
2. Press to quit preset program and function value after complete single program
3. Setting procedure: returns to beginning of setting mode before pressing the START key.
4. Press to stop exercise during workout time.
SPEED UP / SPEED DOWN
1. Press to increase/decrease exercise speed by 0.1km/ ml.
2. Hold the button to increase/decrease rapid speed by 0.5km/ ml per second and release the button to stop the
function.
3. Press to select programs and preset related function value.
POWER ELEVATION SWITCH:
To change the elevation press up to increase and down to decrease.
-
IMPORTANT
The console display will turn itself off automatically about five minutes after the belt has stopped moving.
•
The pulse function is for reference only, and not to be used for medical purposes.
•
SAFETY KEY
The safety key must be inserted into the slot on the console in order to operate the treadmill. Always insert the safety key
and attach the clip to your clothing at your waist before beginning your workout.
If you should encounter problems and need to stop the motor quickly, simply pull on the cord to disengage the safety key
from the console. To continue operation simply turn the power switch to off, and then reinsert the safety key into the console
and press on the power key.
For operation simply turn the power switch to off, and then reinsert the safety key into the console and press on the power
key.
SPEED UP A
STOP/ENTER C
SAFETY KEY E
B START
D SPEED DOWN
F POWER ELEVATION SWITCH
4
GB