Faber INHC29SSV Instrucciones De Instalación página 13

6
ELECTRICAL INSTALLATION WITH CONNECTION CABLE
GROUNDING INSTRUCTIONS This appliance must
be grounded. In the event of an electrical short circuit,
grounding reduces the risk of electric shock by providing
an escape wire for the electric current. This appliance
is equipped with a cord having a grounding wire with a
grounding plug. The plug must be plugged into an outlet
that is properly installed and grounded.
WARNING - Improper grounding can result in a risk of
electric shock.
are not completely understood, or if doubt exists as to
whether the appliance is properly grounded.
Do not use an extension cord. If the power supply cord
near the appliance.
ELECTRICAL INSTALLATION WITH
OPTIONAL WIRING BOX
For permanent wiring, use only the Direct Connect
Wiring Box accessory sku WIREBOX, manufactured
by Faber.
7
For Non-Ducted Recirculation
Option
Attach each
charcoal
black grid on
each side of
the blower.
Press the
charcoal
to the black
grid on the
1
blower side
and rotate
clockwise (towards the front of the insert hood)
until it locks into place. Turn counterclockwise
(towards the back of the insert hood) to remove.
Required Activated Charcoal Filter Accessory
- sku # - FILTER1
Long Lasting Activated Charcoal Filter
Accessory - sku # FILTER1LL
(purchased separately)
Direct Connect Wiring Box
Accessory sku # WIREBOX
(purchased separately)
8
2
previously.
Max. 33 "
7/16
13