Maintenance - Chopin CD 2 Modo De Empleo

GB
Laboratory Mill CD 2
4.

Maintenance

The design of the machine avoids complicated maintenance
problems.
Simply check out the following points:
■ Pour several drops of vaseline oil on the distributor roller bearings
(4 points every 6 months).
■ Regularly check the condition of the sieve fittings. The sieve
materials (stainless steel) must not be stressed and must be able to
vibrate at the same rotary speed as the sieve shaft.
Changing the sieve fittings is done by replacing the complete sieve
device.
■ The position of the final beaters has been set during the machine
tests. It is strongly recommended to modify this setting only with
caution and consideration.
Instruction manual
32
02/2017