Phasak PH 9464 Manual Del Usuario página 24

2.3. LCD, Function and Operation Screen
UPS Functions
UPS on
AC Mode
When the AVR is
running,
every second.
AC mode overload
The icon flashes
Battery mode
When the battery charge level is
low, the icon flashes.
NOTE: If the backlight turns off, you can activate it by touching the screen.
LCD Panel
the icon flashes
INTERACTIVE LCD
Description
When the UPS is turned on, the panel will display
this mode for 4 seconds.
The information on the LCD screen will be
displayed in the following order when the LCD
screen is touched.
1. output voltage
2. input voltage
3. Load level
4. battery capacity
When an overload occurs, the alarm will sound every
0.5 seconds.
The alarm will beep every 10 seconds and the
information on the LCD screen will be displayed in
the following order when you touch that screen.
1.Output Voltage
2.Input voltage
3.load level
4.Battery capacity
​
P H 9464