Error Code Table - Phasak PH 9464 Manual Del Usuario

2.4. Error Code Table

Error condition
Shorted output
Overload error
Overload
Battery in poor
condition or heavily
discharged
High Output Voltage
Error
Excess temperature
Note: If an alarm is activated by mistake, call the technical service immediately.
LCD
Disconnect the shorted loads and restart the UPS
again.
Disconnect all loads from the outputs and restart the
UPS again.
Call technical service immediately.
Change the battery
Call technical service immediately.
Call technical service immediately.
INTERACTIVE LCD
Solution
​
P H 9464