Optical Disc Recording Software Disclaimer; Safety And Compliance Information; Safety Precautions - Rimage PrismPlus! Guia Del Usuario

Rimage PrismPlus! User Guide

Optical Disc Recording Software Disclaimer

This Product, Software, or Documentation may be designed to assist you in reproducing material in which you own the
copyright or have obtained permission to copy from the copyright owner. Unless you own the copyright or have permission to
copy from the copyright owner, you may be violating copyright law and be subject to payment of damages and other remedies.
If you are uncertain about your rights, you should contact your legal advisor. If you are neither in possession of the copyright
nor have authorization from the owner of the copyright, unauthorized copying of copyrighted material on an optical disc or any
other media violates national and international legislation and can result in severe penalties.

Safety and Compliance Information

This manual and the indications on the product allow proper and safe operation. The indication marks below help protect you
and other persons from injury, and equipment from damage.
, ,
Warning! According to ANSI (American National Standards Institute) standards, a warning is used to indicate situations
that could result in bodily injury to personnel operating or maintaining the equipment.
n
Caution: Indicates that failure to observe this guideline could result in loss or damage to the equipment, product,
software, or data.

Safety Precautions

To ensure safety, read these precautions and familiarize yourself with their meaning before using the equipment.
, ,
Warning!
•
Do not disassemble or use tools on the printer.
All service procedures should be performed by an
authorized field technician, or sent in for repair. Do
not service the printer with the power cord plugged
into the AC outlet.
4
n
Caution:
•
All equipment with AC line voltage, or low DC
voltages, such as switches, power supplies, fuses,
fans, non-stepper motors, must be replaced with
Rimage-approved components to maintain the
safety approval issued by UL.
•
Do not reach inside the printer unless absolutely
necessary. There may be sharp edges on some
metal parts.
•
Do not use the printer if it is overheating or an
abnormal smell is detected. This may result in a fire
and electric shock. In case of heating or abnormal
smell, immediately disconnect the cable from the
outlet. Contact your dealer for repairs.
•
Do not place or store the printer in a location
where children may reach it. Severe injuries and
equipment damage may occur if the printer is turned
over or falls down.
•
Allow sufficient free space for opening the printer
tray. Do not touch the printer tray while it is moving.
110635_K