Maintenance Routine; Checking Lifting And Lowering; Checking Internal Electronics; Cleaning - Mettler Toledo PJA434 Serie Manual De Usuario

Checklist
Are the electrical points of contact in flawless
condition?
Is the mechanical attachment of the battery intact?
Do the electrical contact points make contact
properly?
Calibration
Is the device within the tolerances as stated by the
manufacturer?
Recommended interval: once a year
Inspecting the age and condition
Is the device still within the electrical or mechanical
service life as specified by the manufacturer?
Inspecting the device prior to operation
Is the device intact?
Has the device been checked than no extraneous
particles are present within?
Is the battery connection performed correctly?
Do cable entries and stopping plugs sit correctly?
Are all unused openings sealed with certified
sealing elements?

6.2 Maintenance Routine

6.2.1 Checking Lifting and Lowering

1 Check lifting and lowering of the forks according to [Using Control Lever Page 9].
2 Check all moving parts, including wheels and bearings, for any deformation or damage.
3 Lubricate hinge points if necessary.

6.2.2 Checking Internal Electronics

Open the battery case and the control cabinet, and check for the following items:
Check the cables for any loose connection or damage.
Check for moisture.

6.3 Cleaning

Special Notes for Cleaning
Use only such cleaning agents that do not act on the plastics used in the scale.
Only use disinfectants and cleaning agents in accordance with the manufacturer's instructions.
Do not use highly acidic, highly alkaline or highly chlorinated cleaning agents. Avoid substances with a
high or low pH value since increased danger of corrosion otherwise exists.
Be particularly careful when cleaning the interior.
12 Maintenance and Service​ ​
WARNING
Damage to the equipment due to incorrect use of cleaning agents.
Yes No Action Performed
Pallet Truck Scale