English
When the appliance is turned OFF
Faulty Battery Packs
This charger will not charge a
faulty battery pack. The charger
will indicate faulty battery pack by
displaying an X on the LCD battery
image. If this occurs, re-insert the
battery pack into the charger. If the
problem persists, try a different
battery pack to determine if the
charger is working properly. If the
new pack charges correctly, then
the original pack is defective and
should be returned to a service
center or other collection site for
recycling. If the new battery pack
elicits the same trouble indication
as the original, have the charger
and the battery pack tested at an
authorized service center.
NOTE: This could also mean a
problem with a charger
WARNING: To reduce the risk of injury, turn the appliance off and disconnect it from the
power outlet when not in use and when making repairs. DO NOT attempt to disassemble the
unit; take it to an authorized service center when service or repair is required.
OPERATION
The DWST1-75659-QW / DWST1-75663-GB
/ DWST1-75664-XE is equipped with memory
capacity in order to store the selected radio
channels and paired Bluetooth devices.
NOTE: The music mode will operate when
connected with the AC/DC power adaptor
and/or when operated solely on battery
power.
NOTE: When the DWST1-75659-QW /
DWST1-75663-GB / DWST1-75664-XE is
connected by the supplied power supply
unit to the outlet it will charge the installed
battery. Unplugged, the appliance can run up
to 8 hours on a fully charged battery using
a premium 2A/h XR Li-ion battery. Using
batteries of lower voltage and amp hours will
yield less run time.
This appliance can be operated in the vertical
or horizontal position.
NOTE: This product has two internal aerials
that contribute to its ruggedness by omitting
an external aerial that can be bent or broken.
46
When the appliance is turned ON
Problem with the battery pack or
charger
These aerials work together to provide 360
degree radio reception without the need of
extending and tuning an extruding antenna
as required by other radios. In order to
improve reception in very low signal areas we
recommend placing the ToughSystem Music
in the vertical position so the handle is facing
upwards, or moving the radio closer to a
window or opening.
Button Functions
The front panel includes a selection dial and
pushbuttons.
.......Selection dial (the selection dial has
more than one function)
...........On/Off button
...........Back button
...........Source selection button
...........Bluetooth button
........Preset buttons
Powering ON and OFF
Press the POWER button (
) for 1 second.
The appliance turns on to the last selected
audio source.
Press the POWER button (
) for 3 seconds.
The appliance turns off.
Volume Adjustment
WARNING: Excessive sound level can
cause hearing loss.
NOTE: The volume is set and saved
separately for each of the audio source types.
Turn the dial (
) clockwise to increase
the volume. To decrease the volume, turn
counterclockwise.
Back Button (
)
After entering any one of the screens, press
the Back button (
) to return to the
previous screen.
Audio Source Select (
)
To choose one of the audio sources (DAB+,
FM, AUX or Bluetooth) push the source
selection button (
) until the desired source
is found. For example, if the radio is on FM,
seen in upper left portion of LCD display,
push the source button to change to AUX
NOTE: As long as there is decent DAB
reception, the appliance will automatically
synchronise with national time signals
broadcast over DAB. Time and date will
display in the following manner: HH:MM
DD/MM.
IF THE TIME AND DATE DISPLAYS IN
DASHES ( --:-- --/-- ) , IT MEANS THE DAB
RECEPTION IS NOT STRONG ENOUGH.
MAIN MENU (General Setup)
General Setup can be accessed from each of
the selected audio sources by:
1.
Pressing the selection dial (
).
2.
Rotating the selection dial clockwise
until Main Menu is reached
3.
Pressing the selection dial to access
the Main Menu.
From the main menu the following actions can
be performed:
•
Sound: tone adjust: Bass, Treble and Mid
English
•
Language: select the interface Language
•
Brightness: adjust the screen Brightness
Restore to default
•
FM TUNER SETUP
The DWST1-75659-QW / DWST1-75663-GB /
DWST1-75664-XE can be tuned to DAB+ / FM
radio frequencies with the option of saving up
to (6) DAB+ and (6) FM preset stations. After
setting and saving the preset stations, pressing
a preset button (
) instantly changes the
frequency to the desired station.
Finding a desired frequency can be performed in
one of two methods: Auto Scan or Manual Tune.
Auto Scan
1.
Press the audio source button (
)
until the required source is reached.
2.
Press the selection dial (
) to enter
the Main Menu (see General Setup).
3.
Rotate the selection dial clockwise until
Auto Scan is reached and press to
select.
The Auto Scan begins searching for the
closest strong, clear signal.
• Rotate the dial clockwise to scan up
the frequencies.
• Rotate the dial counterclockwise to
scan down the frequencies.
4.
Once a desired frequency is found, save
it to one of the channel preset buttons
(see Setting the Preset Buttons).
Manual Tune
1.
Select the required audio source and
enter the Main Menu (see General
Setup).
2.
Rotate the selection dial clockwise and
press it to select Manual Tune.
3.
Rotate the selection dial clockwise
to go up the frequencies or
counterclockwise to go down the
frequencies, until the desired frequency
is reached.
4.
Once a desired frequency is found, save
it to one of the channel preset buttons
(see Setting the Preset Buttons).
47