Description; Features; Player-Unit - Omnitronic CDP-744 Manual Del Usuario

4. DESCRIPTION

4.1 Features

3-unit Dual-CD-player
Well-structured operating fields for high comfort • Skip-buttons for selecting the track • Additional keyboard
for convenient track-selection • Jog/Shuttle-wheel for quick scanning and framewise searching • With Loop-
joystick for optimized Pitch-control (+/- 4 %) and Loop-control • Perfect Loop In without delay • With reloop-
button for calling up the memorized sequence • Clear LED-display of the Loop-function and Reloop-function •
Large Play/Pause-button and Cue-button • Auto Cue-function: the player automatically jumps to where the
music starts • Back Cue-function: by pressing the Cue-button, the player returns to the track-start or Cue-
point • Ergonomic LC-displays of all operation modes • Display switchable from track remain time to track
playback time • Pitch-adjustment of +/- 12 % via Pitchfader • Pitch-adjustment via Pitchfader is displayed •
Random track-selection via Time/Random-button • Auto/Nor-button for switching to playback of one track
only • Relay-button for switching playback automatically to the other player after every track • Open/Close-
button locked in playback-mode • LED-display of all important functions • 19"-dimensions with 5 units

4.2 Player-unit

Frontpanel:
1. POWER SWITCH
Press this button to start operation.
2. DISC-TRAY
To enter the disc. Please refer to the explanations under 6.2 CD-tray.
3. OPEN/CLOSE BUTTON
Via the Open/Close-button, you can open and close the CD-tray.
Rear panel:
4. AC CONNECTION
5. AUDIO OUT-SOCKETS
The music-signal of these sockets is analogue. Connect the output to the respective input of your mixer.
20