Controller - Omnitronic CDP-744 Manual Del Usuario

6. REMOTE CONTROL
Connect the controller via these plugs.

4.3 Controller

In order to design this user manual as structured as possible, only one side of the controller is described.
Frontpanel:
1. SECTION UNIT 1
The left part of the controller is designed for controlling the left CD-player (1).
2. SECTION UNIT 2
The right part of the controller is designed for controlling the right CD-player (2).
3. OPEN/CLOSE-BUTTONS
Via the Open/Close-buttons, you can open and close the respective CD-tray.
Stop-function:
If you press and hold the Open/Close-button for approx. 1 second, the respective CD-player goes into Stop-
mode. The display shows the total time of the CD.
4. DISPLAY
LCD-display for displaying the different modes and functions. Please refer to the explanations under 6.3 LCD-
display.
5. SHUTTLE-WHEEL
Playback-mode:
Via the Shuttle-wheel, you can quickly scan forwards and backwards. Turn the Shuttle-wheel to the right in
order to scan forwards and turn it to the right in order to scan backwards. The further you turn the Shuttle-
wheel the higher the scanning-speed.
Pause-mode:
In the pause-mode, the current frame is repeated until you turn the Shuttle-wheel.
6. JOG-WHEEL
Pause-mode:
In the pause-mode, the current frame is repeated until you turn the Jog-wheel.
Via the Jog-wheel, you can slowly search within a title forwards and backwards. In this way, you can easily
find a Cue-point for example.Turn the Jog-wheel to the right in order to search forwards and turn it to the right
in order to search backwards. The faster you turn the Jog -wheel the higher the searching-speed.
7. SKIP-BUTTONS
Via the Skip-buttons, you can select the desired track. Please refer to the explanations under 6.5 Selecting a
track via the Skip-buttons.
21