Mounting Instruction - Bosch Rexroth SMeth Manual Del Usuario

3 609 929 727/1.2 | SMeth

4 Mounting Instruction

Qualified personnel are:
– Project personnel, familiar with the safety
regulations of automation systems and
electrical engineering.
– Operators, instructed in the use of the
equipment and having knowledge of the
relevant operational parts of this docu-
mentation.
– Commissioning personnel authorized to
set electric circuits and machines/sys-
tems into operation, earth and mark them,
in accordance with the regulations of se-
curity technology.
Repairs and replacement of parts carried out
by the user are his own responsibility. After
repairing or replacing parts, all prescribed
functional and safety checks must be carried
out.
Electric Drives and Controls | Bosch Rexroth AG 9/28
4 Mounting Instruction
The module is plugged into a KE300 system
component.
3 Min
It should be ensured that the interface modu-
le is completely inserted.
The front knurled bolts must be tightened.
Please take care that the front blind fits close-
ly to BT300.
The power is supplied directly to the interface
module by the KE300 communication unit.
Before inserting the
Rexroth interface mo-
dules, the BT 300
card rack must have
been voltage-free for
at least 3 min.