Assembling The Product; Mounting The Lubrication Unit - Bosch rexroth LU 2/P Instrucciones De Montaje

Please note:
• The lubrication unit
LU 2/P-24V-3L does
not necessarily have to
be mounted on a belt
section/conveyor unit.
• For installation on a
belt section/conveyor
unit, we recommend
the assembly kit LU 2/P,
1)
3 842 562 923 .
• Install the lubrication
unit LU 2/P-24V-3L at a
central point where it can
be easily visible during
subsequent operation.
• We recommend to seal the
G1/8 threads, e.g. with
1)
Loctite 248 .
1. Mount the screw
connection on the
pressure/outlet
distributor.
2. Mount the lubrication
unit vertically on a
section profi le.
1) Not included in the scope of
delivery, please order separately.

8.5 Assembling the product

8.5.1 Mounting the lubrication unit (mounting example on conveyor unit with
mounting kit LU 2/P
2x
SW10
M =12 Nm
D
Fig. 5: Mounting the lubrication unit (mounting example on conveyor unit with mounting
1)
kit LU 2/P )
1)
)
2x
SW13
M =25 Nm
D
2
3 842 557 976/2020-08, MIT: LU 2/P-24V-3L, Bosch Rexroth AG
Assembly 23/42
1
SW10
M =6 Nm
D
G1/8 D4
Push-In
1/8" BSP
SW10
M = 6Nm
D
SW9
M =5 Nm
D
557 976-14