Work Area Safety; Personal Safety; Moving The Compressor - Husky C304H Guía De Uso Y Cuidado

Safety Information (continued)

WORK AREA SAFETY

□
Keep your work area clean and well lit. Ensure
floors are not slippery from wax or dust.
□
Operate the air compressor in an open area at least
18 in. (0.5 m) away from any wall or object that
could restrict the flow of fresh air to ventilation
openings.
WARNING: Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks which
may ignite the dust or fumes. Keep bystanders, children,
and visitors away while operating tools. Distractions can
cause you to lose control.

PERSONAL SAFETY

□
Keep proper footing and balance at all times.
Proper footing and balance enables better control
of the tool in unexpected situations
□
Do not use on a ladder or unstable support.
WARNING: Operating any power tool can result in foreign
objects being thrown into your eyes, which can result in
severe eye damage. Before beginning operation, always
wear safety goggles, safety glasses with side shields, or
a full face shield when needed. Always use eye protection
marked to comply with ANSI Z87.1.
WARNING: CONTAINS LEAD. May be harmful if eaten or
chewed. May generate dust containing lead. Wash hands
after use. Keep out of reach of children.
WARNING: This product can expose you to chemicals
including lead, which is known to the State of California to
cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
WARNING: Use safety equipment. Always wear eye
protection with side shields when operating power tools.
A dusk mask, non-skid safety shoes, hard hat, or hearing
protection must be used for appropriate conditions.
MOVING THE AIR COMPRESSOR
□
Grasp the handle of the compressor and tilt the
compressor back to rest on the wheels.
□
When the location is reached, slowly lower the
compressor to the ground. Always store the
compressor in a vertical position resting on the
rubber bumpers and wheels.
□
When transporting the compressor in a vehicle,
trailer, etc., make sure the tank is drained and the
unit is secured with straps to prevent tipping. Use
care when driving to prevent tipping the unit over in
the vehicle. Damage can occur to the compressor
or surrounding items if the compressor is tipped.
The compressor is too heavy to be lifted by one
person. Obtain assistance from others before lifting.
WARNING: This compressor is not equipped for, and
should not be used to supply breathing air. Additional
equipment would be necessary to properly filter and
purify the air to meet minimal specifications for Grade D
breathing, as described in Compressed Gas Association
Commodity, Specification G 7.1 - 1966, OSHA 29 CF9
1910.134. Compressed Gas Association, 4221 Walney
Road, Fifth Floor, Chantilly, VA 20151-2923, (703) 788-2700,
www.cganet.com. Any such additional equipment has
not been examined and no implication of proper use for
breathing air is intended or implied.
CAUTION: Always disconnect the air supply and power
supply before making adjustments, servicing a tool, or
when a tool is not in use.
WARNING: Stay alert when operating a power tool. Do
not use the tool while tired or under the influence of drugs,
alcohol, or medication.
WARNING: Do not wear loose clothing or jewelry.
Contain long hair. Keep your hair, clothing, and gloves away
from moving parts. Loose clothes, jewelry, or long hair can
be caught in moving parts.
WARNING: Never touch any exposed metal parts on
compressor during or immediately after operation. The
compressor will remain hot for several minutes after
operation. Do not reach around protective shrouds or
attempt maintenance until the unit has been allowed
to cool.
CAUTION: The compressor is too heavy to be lifted by
one person. Obtain assistance from others before lifting.
WARNING: Risk of unsafe operation. Ensure proper
footing and use caution when rolling the compressor so
that the unit does not tip or cause loss of balance.
CAUTION: The wheels and handle do not provide
adequate clearance, stability, or support for pulling the
unit up and down stairs or steps. The unit must be lifted or
pushed up a ramp.
3
Please contact 1-888-43-HUSKY for further assistance.
HUSKYTOOLS.com