Torquing The Compressor Head Bolts; Care And Cleaning - Husky C304H Guía De Uso Y Cuidado

Maintenance (continued)

TORQUING THE COMPRESSOR HEAD BOLTS

The air compressor pump head bolts should be kept
properly torqued. Check the torques of the head bolts
after the first five hours of operation.
□
Torque to 15-20 ft-lbs (20-27 Nm).

Care and Cleaning

□
Drain the air tank of moisture after operation.
□
When not in use, store the compressor in a cool, dry place.
□
Disconnect the air hose and hang open ends down to allow any moisture to drain.
□
Protect the electrical cord and air hose from damage (such as being stepped on or run over). Wind them
loosely around the compressor handle.
23
Please contact 1-888-43-HUSKY for further assistance.
HUSKYTOOLS.com