Kasanova HGK000002NOC Manual De Instrucciones página 15

MULTIFUNCTIONAL STAND MIXER
BEFORE CONNECTING TO POWER
• Before connecting to the power, please check whether the type of supply
and the mains voltage match with the details given on the rating label on the
appliance.
• Using for the first time, rip off all wrapping paper and plastic bags. Clean the
fittings.
STEPLESS SPEED & PULSE SPEED
After settle down the parts you need,
plug in power source,
then turn knob to start the operation.
If you need slow speed,
turn clockwise the adjustment for a little.
If you need fast speed,
turn clockwise the adjustment for more.
For hook, whisk and beater,
cannot exceed its max speed marked in the product.
If not, product is possible damaged.
There is another adjustment: pulse switch.
Turn the knob anticlockwise to "P", the machine will move on.
Stop turning, the machine will back "0" and stop moving.
CHOOSING THE RIGHT ACCESSORY
Important:
Before turn on knob for operations, must be sure on below issue:
1. Cannot work more capacity and time than manual requested
2. When top part of machine locked into base, the arm up knob is back its
original position as pic. A
3. Except blender / Grinder function, the blender layout lid must be locked well
into the blender layout as pic. B
If not, product is possible damaged or not function.
(fig. 1)
15
(fig. 2)