Supplement; Safety Instructions - Dräger Atlan A300 Manual Del Usuario

Supplement to the instructions for use
Atlan
Anesthesia workstation A300, A300 XL, A350, A350 XL
Instructions for use
Atlan A300, A300 XL, A350,
A350 XL SW 1.0n
● Keep this supplement with the instructions for use.
This supplement updates the information of the instructions for use in the following
chapters.

Safety instructions

Device
The following information has been updated:
Penetrating liquid
Penetrating liquid may cause the following:
– Damage to the device
– Electric shock
– Device malfunctions
Personal injury and property damage may occur as a consequence.
► Ensure that no liquid penetrates the device.
► Do not place any containers containing liquids above or on the device.
► Do not transport infusion bags or other containers with liquids with the device.
► If the device was exposed to moisture or liquids during transport, wipe it/them off
after transport. Before connecting the device to the power supply, ensure
sufficient drying time.
► Only use the device on level surfaces without inclination.
Intrahospital transport
Visual inspection after transport
The following information has been updated:
1. Check the device for damage, particularly the hoses and cables.
2. Do not operate a damaged device. The damage must be repaired by service
personnel before the device is used.
3. Before connecting the device to the power supply, check the electrical
connections and auxiliary power sockets for residual moisture. Wipe off the
moisture. Ensure sufficient drying time.
4. Before operating the device, make sure it is on a level surface without
inclination.
|

Supplement

Atlan A300, A300 XL, A350, A350 XL SW 1.0n
Supplement to the instructions for use
Part number Edition
9056001 2 – 2019-04 and higher
|
en
5