Wallbox DYNAMIC POWER SHARING Manual De Instrucciones página 49

ES
Configuración
1. Each Dynamic power sharing network consists of one primary charger and up to 24 secondary
chargers.
2. Configure the rotary switch for each charger to configure its role.
3. Any other: Stand alone.
Check the chargers Installation guide
FR Configuration
1. Each Dynamic power sharing network consists of one primary charger and up to 24 secondary
chargers.
2. Configure the rotary switch for each charger to configure its role.
3. Any other: Stand alone.
Check the chargers Installation guide
IT
Configurazione
1. Each Dynamic power sharing network consists of one primary charger and up to 24 secondary
chargers.
2. Configure the rotary switch for each charger to configure its role.
3. Any other: Stand alone.
Check the chargers Installation guide
NO Konfigurasjon
1. Each Dynamic power sharing network consists of one primary charger and up to 24 secondary
chargers.
2. Configure the rotary switch for each charger to configure its role.
3. Any other: Stand alone.
Check the chargers Installation guide
CA Configuració
1. Each Dynamic power sharing network consists of one primary charger and up to 24 secondary
chargers.
2. Configure the rotary switch for each charger to configure its role.
3. Any other: Stand alone.
Check the chargers Installation guide
DE
Konfiguration
1. Each Dynamic power sharing network consists of one primary charger and up to 24 secondary
chargers.
2. Configure the rotary switch for each charger to configure its role.
3. Any other: Stand alone.
Check the chargers Installation guide
Configuratie
NL
1. Each Dynamic power sharing network consists of one primary charger and up to 24 secondary
chargers.
2. Configure the rotary switch for each charger to configure its role.
3. Any other: Stand alone.
Check the chargers Installation guide
PT
Configuratie
1. Each Dynamic power sharing network consists of one primary charger and up to 24 secondary
chargers.
2. Configure the rotary switch for each charger to configure its role.
3. Any other: Stand alone.
Check the chargers Installation guide
SV Konfiguration
1. Each Dynamic power sharing network consists of one primary charger and up to 24 secondary
chargers.
2. Configure the rotary switch for each charger to configure its role.
3. Any other: Stand alone.
Check the chargers Installation guide