Getting Started - Teac SR-L250i Manual Del Usuario

The SR-L250i comes mounted with an adapter "60GB
(color) + Photo 40/60GB". To play your iPod through
the SR-L250i, you have first to check if the factory
mounted adapter fits your model of iPod. If it does
not, you have to replace it with a correct one, as
explained below.
1. Remove the adapter from the Dock of the SR-
L250i.
Hold the left and right sides of the adapter and
gently pull it up.
2. Choose the Dock adapter that fits your iPod
mobile digital device.
"nano" for iPod nano 1st and 2nd generations.
"nano 3G" for iPod nano 3rd generation.
"60GB (color) + Photo 40GB/60GB" for iPod with
Click Wheel (40 GB), iPod with color display, iPod
with video (60 GB) and iPod classic (160 GB).
"20GB + U2" for iPod with Click Wheel (20 GB, U2
Special Edition), iPod with video (30 GB) and iPod
classic (80 GB).
"mini" for iPod mini.
"iPod touch" for iPod touch.
< Use a commercially available adapter to play iPod
with Dock connector.

Getting Started

3. Insert the adapter into the Dock of the SR-
L250i.
Fit the front edge of the adapter into the Dock, and
then press the back edge of the adapter onto the
Dock until a slight "click" is heard indicating the
adapter is inserted correctly.
1
< When you need to remove the adapter, hold the
left and right sides of the adapter and gently pull it
up.
Compatible iPod Software
In case your iPod will not work with the SR-L250i or
with the remote control unit, software update may
solve the problem.
Visit the Apple website and download the latest
iPod Software.
http://www.apple.com/ipod/download/
iPod is a trademark of Apple Computer, Inc.,
registered in the U.S. and other countries.
2
13