Listening To The Radio - Teac SR-L250i Manual Del Usuario

1
1
Select "TUNER" using the FUNCTION button.
2 Select FM or AM using the FM/AM button.
3
Select the station you want to listen to (auto
selection).
Hold down the SKIP button (.or/) for more
than 2 seconds and release it when the frequency
display begins to change.
When a station is tuned in, the tuning process will
stop automatically.
< To stop the auto selection, press the SKIP button.
Selecting stations which cannot be tuned
automatically (manual selection)
When the SKIP button (. or/ ) is pressed
momentarily the frequency changes by a fixed step.
Press the SKIP button repeatedly until the station
you want to listen to is found.
28

Listening to the Radio

3
2
Checking the tuner frequency
If the clock is displayed, press the DISPLAY button
to display the current band and frequency for 20
seconds.
If the reception is poor
For the best reception, rotate the FM or the AM
antenna until you get stations clearly.
FM MODE button
Pressing this button alternates between Stereo
mode and Mono mode.
Stereo
FM stereo broadcasts are received in stereo and the
"STEREO" indicator lights in the display.
< If the sound is distorted and the "STEREO"
indicator flashes, the signal is not strong enough
for good stereo reception. In this case, change to
MONO mode.
Mono
To compensate for weak FM stereo reception,
select this mode. Reception will now be forced
monaural, reducing unwanted noise.