Teac SR-L250i Manual Del Usuario página 33

ALARM 1, ALARM 2
To turn on the timer
1 After setting the timer, press the ALARM 1 or
ALARM 2 button to turn the timer on.
The Timer indicator (
display.
2
Prepare the source.
When the source is set to "CD", set a CD.
When the source is set to "USB", plug the USB
memory card into the USB connector.
When the source is set to "iPod", insert an iPod.
When the source is set to "TUNER", tune in a
station.
3 Press the button to turn the unit standby.
Do not forget to turn the unit standby, or the
timer will not work.
If you turn the timer on when the unit is on, the
unit will turn off when the timer reaches the off
time.
< Playback volume will gradually increase up to your
set volume when the unit is turned on by timer.
or ) appears on the
< When the source is set to "CD" but no disc is
loaded, and when the source is set to "USB" but
no USB memory card is plugged, the timer will
work in TUNER mode.
< If the source is set to "iPod" but no iPod is set, the
unit will turn on into TUNER mode.
< When the source is set to "TUNER" and the unit
turns on, it will tune in to the station you selected
last time.
33