Emergency Switch - Teac SR-L250i Manual Del Usuario

MP3 compatibility
< This unit can play MP3 files recorded on a CD-R,
CD-RW or USB memory card.
< File names of MP3 should be alphanumeric
characters. This unit cannot display symbols and
full-size or 2 bytes-wide characters (such as
Japanese, Chinese, etc.) correctly. Also, be sure to
use the file extension ".mp3".
< The disc must be finalized in order to play.
< The CD-ROM must be ISO 9660 compatible.
< When more than 200 files or folders are recorded
on the disc, the unit might not be able to play it
correctly.
< Mono or stereo MPEG-1 Audio Layer 3 format, 44.1
or 48 kHz, fixed bit-rate.
< Audio encoded at 128 Kbps should sound close to
regular audio CD quality. Although this player will
play lower bit-rate MP3 tracks, the sound quality
becomes noticeably worse at lower bit-rates.

Emergency Switch

If the disc cannot be ejected, remove the disc by
following procedure.
1 In the standby mode, push the emergency switch
(white switch in the hole) on the bottom of the unit.
The disc comes out.
2 Remove the disc.
3 Turn on the unit and insert the disc again.
< If "EJECT ERROR" is displayed, unplug the power
cord from the outlet and plug it again.
< If you remove the disc while the unit is turned on,
the mechanism is still stuck. In this case, press the
eject button (L) once to recover the unit.
< The emergency switch does not work when the
unit is disconnected from the AC outlet.
7