Safety Instructions - OHAUS STLC1DG Manual De Instrucciones

s i
afeTy nsTruCTions
Please read the entire instruction manual before operating the Large Capacity Stirrer.
use the Large Capacity Stirrer in a hazardous atmosphere or with hazardous
materials for which the unit was not designed. Also, the user should be aware
that the protection provided by the equipment may be impaired if used with
accessories not provided or recommended by the manufacturer, or used in a
manner not specified by the manufacturer.
Always operate unit on a level surface for best performance and maximum
safety.
lift unit by the top plate.
Heavy walled glass or polypropylene container recommended when stirring
at high speeds. If spin bar de-couples at higher speeds, thin walled glass
containers may break.
To avoid electrical shock, completely cut off power to the unit by disconnecting
the power cord from the unit or unplug from the wall outlet. Disconnect unit
from the power supply prior to maintenance and servicing.
Spills should be removed promptly. Do not immerse the unit for cleaning.
operate the unit if it shows signs of electrical or mechanical damage.
Earth Ground - Protective Conductor Terminal
Alternating Current
3
s & r
TanDarDs egulaTions
Ohaus hereby declares under it's sole responsibility that the construction of this
product conforms in accordance with the
following standards:
Safety standards:
IEC 61010-1 Safety requirements for electrical equipment for measurement,
control and laboratory use. Part: General Requirements.
IEC 61010-2-051 Part II: Particular requirements for laboratory equipment for
mixing and stirring.
UL Std. No. 61010-1
CSA/CAN C22.2 No. 0-M91
CSA/CAN C22.2 No. 61010-1-04
EMC standards:
EN61000-3-2 EN61000-3-3
EN61000-4-2 EN61000-4-3
EN61000-4-4 EN61000-4-5
EN61000-4-6 EN61000-4-11
IEC 61326
Associated EU guidelines:
EMC directive 2014/30/EU
LVD directive 2014/35/EU
RoHS directive 2015/863/EU