Yakima FAIRING Manual De Instrucciones página 2

Move front crossbar of your Yakima Rack as
far to front of roof as possible.
• When using Q Towers,
crossbar placement is fixed. Skip this step!
• For Fairing compatibility, Q Tower's M2
measurment must be less than 7 inches.
Push rubber strip onto bottom edge of fairing.
Install Snap Arounds on front crossbar.
Using long carriage bolts, install "long end" of
brackets on top or bottom of Snap Arounds.
Flatter roofs require brackets to be located on bottom of
Snap Arounds. Exchange "long end" with "short end" of
bracket, if needed, for better fit.