Upgrade Procedures; Upgrading The Software Programme And The Map Database; Checking Whether The Upgrade Was Done Properly - Pioneer T1000-24303 Manual De Instrucciones

Chapter
04 Instructions for upgrading

Upgrade procedures

! NEVER stop the engine of your vehicle or
turn off the power supply to the navigation
system until the installation is completed.
Turning the power off during upgrade pro-
cess causes a malfunction or failure of the
navigation system.
! No functions are available during upgrade
process.
Upgrading the software
programme and the map database
This section describes the upgrade proce-
dures for your navigation system.
p The upgrade takes approximately 45 min-
utes in total.
1 Park your vehicle in a safe place and
apply the handbrake.
2 Insert the upgrade microSD card into
the SD card slot.
The navigation system restarts and then the in-
stallation begins.
p If you are using an SD memory card com-
patible model, insert a microSD card into
the SD card adapter.
p Be sure to use an SD memory card with the
write-protect switch unlocked.
The message confirming whether or not to
start the update will appear.
3 Touch [Yes].
22
Engb
4 Wait until the upgrade process is com-
plete.
When data installation completes, password
lock processing starts.
The message confirming whether or not to
start the update will appear.
5 Touch [OK].
6 Wait until the update process is com-
plete.
Update is completed.
Checking whether the upgrade
was done properly
Display "Information" screen to compare the
current version number with the previous one.
1 Press the HOME button to display the
"Top Menu" screen.
2 Touch .
The "Information" screen appears.
3 Touch [Version Information].
The current version is displayed.
4 Make sure that the current version is
3.000000.
5 Eject the upgrade microSD card.