KTM Power Parts 62014910033 Manual Del Usuario página 9

13
13
12
E
14
15
16
17
2
17
12
13
- Remove the screws (12) on both sides (Figure E) and set down the cock-
pit holder (13) toward the front (Figure F).
F
- Disconnect connectors (14) and (15).
Assembly
See the Owner's Manual for all torques.
- Remove the original switch element (16) and mount the start emergency-
off light switch (3), which is included.
- Route the cable of the start emergency-off light switch (3) as it was for the
original switch element.
- Connect the adapter wiring harness for the supplementary headlight (2).
- Connect all connectors to the adapter wiring harness for the supplemen-
tary headlight (2).
- Position the cockpit holder (13) and secure it with the original screws M8x20
(12).
- Route the cable connector (17) of the supplementary headlight toward the
rear.
9