Logitech Harmony 800 Guía De Inicio página 8

Logitech Harmony 800
Step 4: Add devices
After you have collected the model numbers for your entertainment
devices, you can begin adding them to your Harmony account.
You can use your Harmony 800 to control up to 15 devices.
The guided setup process will walk you through the steps of setting
up your devices. You'll be asked to enter the manufacturer name and
model number for each entertainment device you want to control with
your Harmony remote.
Note:
If you add the wrong device, you can remove it once initial setup
is complete.
Step 5: Set up your connected device
the device you want to use the slide-out keyboard and on-screen touchpad
with. Using the keyboard, you can enter text in a search bar or chat
window. Using the touchpad, you can control the pointer on a web page.
14 English
You can use the keyboard and touchpad with a single connected device.
You can change which device you use the keyboard and touchpad with,
but you cannot use them with more than one device at a time.
After you have chosen the device, you will be instructed to plug the
supplied Unifying receiver into a USB port on the device. The Unifying
receiver is a wireless radio receiver that allows you to connect to a device
without a cable.
Remove the Unifying receiver from the bottom of the charging cradle
and connect it to a USB port on your connected device.
Plugging in the Unifying receiver
Getting Started Guide
English 15