Hints On Disposal - Klarstein 10032095 Manual Del Usuario

EN
20
Electrical connection
• Before connecting the appliance, compare the connection data (voltage and
frequency) on the rating plate with those of your mains power supply. The data
must correspond in order to avoid damage to the appliance. If in doubt, ask your
electrical appliance retailer.
• The socket has to be protected by at least a 10 A circuit breaker.
• If the appliance is to be connected to the power supply via an extension cable, the
cable cross-section has to be at least 1.5 mm².
• Ensure that the mains cable is undamaged and is not laid over hot surfaces or sharp
edges.
• The mains cable must not pulled tightly, bent or come into contact with the hot
appliance or hot surfaces.
• Place the cable in such a way as to avoid danger from tripping.
• The electrical safety of the appliance is only assured when it is connected to a
properly installed protective earth (PE) conductor system. Connection to a mains
socket without PE
• conductor is forbidden. If in doubt, the electrical system must
• be checked by a qualified electrician.
• The manufacturer assumes no liability for injury or damage caused by a missing or
interrupted protective earth conductor.

HINTS ON DISPOSAL

According to the European waste regulation 2012/19/
EU this symbol on the product or on its packaging indicates
that this product may not be treated as household waste.
Instead it should be taken to the appropriate collection point
for the recycling of electrical and electronic equipment. By
ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment
and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more
detailled information about recycling of this product, please
contact your local council or your household waste disposal
service.