Quick Start Guide - Klarstein 10032095 Manual Del Usuario

QUICK START GUIDE

1 Activate the display by pressing any key.
2 Wipe the appliance and the accessories with a slightly damp cloth.
3 Wash the coffee jug (7) with warm water and washing-up liquid.
4 Fill the water tank (13) with fresh water up to mark 10 as described in the section
Filling with water.
5 Fill the appliance with coffee as described in the section
Filling with coffee beans.
6 Rinse the filter insert (1 1) with clean water and install it in the appliance as
described in the section Inserting the filter.
7 Insert an empty unused filter bag as described in the section
Inserting a new filter bag.
8 Place the coffee jug (7) with the lid on the hot plate (8) under the filter
compartment (10).
9 Set the number of cups to 10 as described in the section
Setting the number of cups.
10 Press the Start button (19) to switch the grinder on.
1 1 Wait until all the water has run through and the „cup" symbol (20) starts to flash.
12 Empty the coffee jug (7) and pour the coffee away.
13 Wash the coffee jug (7) with warm water and washing-up liquid.
Note: During the initial period of use, odour may be produced by the materials used
in the appliance. The odour will diminish after a short period of time.
EN
23