Starting The Appliance - Amibot aNIMAL xl Manual De Usuario

EN
Operating the appliance
Inserting the H2O tank
The vacuum mode stops when the cleaning mode is selected; the
vacuum stops when the robot detects the water tank.
Clip it to the back of the robot. The robot automatically detects the
water tank thanks to its tank sensor. The robot is ready to start its
cleaning cycle.
NOTES:
• You can regulate the H2O tank's water flow intensity by pressing the MAX
button and selecting the desired intensity from 1 to 3.
• Do not use the H2O tank to clean rugs or carpets.
• The water tank must be removed from the robot before it is charged.

Starting the appliance

After attaching the dust bin or H2O tank, switch the robot on. Press
the AUTO button on the robot or on the Remote Control. The robot
starts its cleaning cycle in AUTO Mode.
14